RISC-V System emulator
QEMU can emulate both 32-bit and 64-bit RISC-V CPUs. Use the
qemu-system-riscv64 executable to simulate a 64-bit RISC-V machine,
qemu-system-riscv32 executable to simulate a 32-bit RISC-V machine.
QEMU has generally good support for RISC-V guests. It has support for several different machines. The reason we support so many is that RISC-V hardware is much more widely varying than x86 hardware. RISC-V CPUs are generally built into “system-on-chip” (SoC) designs created by many different companies with different devices, and these SoCs are then built into machines which can vary still further even if they use the same SoC.
For most boards the CPU type is fixed (matching what the hardware has),
so typically you don’t need to specify the CPU type by hand, except for
special cases like the
Choosing a board model
For QEMU’s RISC-V system emulation, you must specify which board
model you want to use with the
there is no default.
Because RISC-V systems differ so much and in fundamental ways, typically operating system or firmware images intended to run on one machine will not run at all on any other. This is often surprising for new users who are used to the x86 world where every system looks like a standard PC. (Once the kernel has booted, most user space software cares much less about the detail of the hardware.)
If you already have a system image or a kernel that works on hardware
and you want to boot with QEMU, check whether QEMU lists that machine
-machine help output. If it is listed, then you can probably
use that board model. If it is not listed, then unfortunately your image
will almost certainly not boot on QEMU. (You might be able to
extract the file system and use that with a different kernel which
boots on a system that QEMU does emulate.)
If you don’t care about reproducing the idiosyncrasies of a particular
bit of hardware, such as small amount of RAM, no PCI or other hard
disk, etc., and just want to run Linux, the best option is to use the
virt board. This is a platform which doesn’t correspond to any
real hardware and is designed for use in virtual machines. You’ll
need to compile Linux with a suitable configuration for running on
virt supports PCI, virtio, recent CPUs and
large amounts of RAM. It also supports 64-bit CPUs.
Unfortunately many of the RISC-V boards QEMU supports are currently
undocumented; you can get a complete list by running
qemu-system-riscv64 --machine help, or
qemu-system-riscv32 --machine help.
RISC-V CPU firmware
When using the
virt machine there are three different
firmware boot options:
This is the default behaviour if no
-bios option is included. This option
will load the default OpenSBI firmware automatically. The firmware is included
with the QEMU release and no user interaction is required. All a user needs to
do is specify the kernel they want to boot with the
QEMU will not automatically load any firmware. It is up to the user to load all the images they need.
Tells QEMU to load the specified file as the firmware.